Résumés
Résumé
Cette étude présente une stratégie antibiofilm appliquée à une membrane de dialyse, l’AN69; il s’agit de réaliser une modification initiale de la surface de la membrane par un polyélectrolyte cationique, le poly(diallyldiméthyl-ammonium), noté PDADMA, selon un protocole de type « layer-by-layer ». Les caractéristiques physico-chimiques des deux membranes, l’AN69 et l’AN69 modifiée par le PDADMA, sont suivies par la détermination de la modification de la charge de la membrane en mettant en oeuvre des mesures de potentiels d’écoulement et de nombres de transports de Li+, de perméabilité hydraulique et des analyses morphologiques et topographiques effectuées par les microscopies électroniques à balayage et à force atomique, respectivement avant et après exposition à E. coli et à un biofilm marin. Nos résultats montrent tout d’abord un rôle majeur joué par l’attraction électrostatique entre les microorganismes et l’AN69 modifiée par le PDADMA à l’origine d’une adhésion forte des bactéries.
Par ailleurs, nous avons mis au point un protocole original d’élimination du biofilm marin. Ce protocole consiste à immerger la membrane modifiée par le PDADMA et encrassée, dans une solution de chlorure de sodium 2M afin d’écranter les charges électrostatiques à l’origine de l’accroche du polyélectrolyte et permettre le décrochage du PDADMA qui entraîne avec lui l’encrassement (constitué de bactéries et autres résidus de biofilm). La recharge d’un film frais de PDADMA permet alors une réutilisation à l’infini de la membrane AN69. La simplicité de ce protocole « de régénération » ouvre la possibilité d’une modification non permanente des membranes de dialyse, dans le but de limiter les problèmes récurrents de biocolmatage et d’augmenter les durées de vie des membranes en milieu marin.
Mots clés:
- revêtement antibiofilm,
- poly(diallyldiméthyl-ammonium),
- membrane de dialyse AN69,
- Escherichia coli,
- bio-colmatage marin
Abstract
The harmful effects generated by biofilms have an extremely high cost. In this study, we were interested in the formation of marine biofilms forming on the wellknown anionic dialysis membrane AN69 used in the reduction of seawater salinity for the preparation of body-washing solutions. We focused our study on two membranes: AN69 and AN69 modified (denoted AN69 mod) by the sorption of poly(diallyldimethyl-ammonium), a cationic polyelectrolyte denoted by PDADMA. Physico-chemical characteristics (membrane charge from Li+ transport and streaming potential measurements, water flux from hydraulic permeability measurements and morphological/topographical measurements using SEM and AFM, respectively) were monitered during the exposure of both membranes to E. coli and natural marine biofouling solutions. Our results showed that the modification of the AN69 membrane by PDADMA its charge and increased its electrostatic affinity for bacteria. Electrostatics forces are, therefore, the main forces responsible for membrane biofouling. Furthermore we developed a simple antibiofilm protocol based on a one-step dipping operation applied to the fouled AN69 membrane which eliminates the PDADMA and associated bacteria. For the first time, all deposited marine bacteria were easily eliminated allowing for the regeneration and sustainable use of the AN69 membrane.
Key words:
- dialysis membrane AN69,
- antifouling coating,
- poly(diallyldimethylammonium),
- Escherichia coli,
- marine biofouling
Parties annexes
Références bibliographiques
- Afnorn°45-101 (juillet 1996). Filtration des liquides : perméabilité à une eau de référence. ISSN 0335-3931.
- Akthakul A., R. Salinaro, A.M. Mayes (2004). Design of biodegradable amphiphilic polymers: Well-defined amphiphilic polyphosphates with hydrophilic graft chains via ATRP. Macromolec., 37, 7663- 7668.
- Ganz T. (2001). Fatal attraction evaded. How pathogenic bacteria resist cationic polypeptides. J. Exper. Med., 1939, F31-F33.
- Hilal N., l. Al-Khatib, p.b. Atkin, v. Kochkodan et n. Potapchenko (2003). Photochemical modification of membrane surfaces for (bio)fouling reduction: a nano-scale study using AFM. Desalinatn, 158, 65‑72.
- Hilal N., l. Al-Khatib, p.b. Atkin, v. Kochkodan et n. Potapchenko (2004). Surface modified polymeric membranes to reduce (bio)fouling: a microbiological study using E. coli. Desalinatn, 167, 293‑300.
- Nguyen T.Q., k. Glinel, m. Pontié et z. Ping (2004). Immobilization of bio-macromolecules onto membranes via an adsorbed nanolayer: An insight into the mechanism. J. Membr. Sci., 232, 123-132.
- Pontié M., c. Diawara, m. Rumeau, d. Aureau et p. Hemmery (2003). Seawater nanofiltration (NF): Fiction or reality? Desalinatn, 158, 277-280.
- Pontié M., h. Essis-Tomé, a. Elana et t.q. Nguyen (2005). Fabrication and physicochemical characterization of a novel dialysis membrane by adsorption of inverse polyelectrolyte nanolayers. C.R.A.S., Chim. 8, 1135-1147.
- Rubio, C. (2002). Compréhension des mécanismes d’adhésion des biofilms en milieu marin en vue de la conception de nouveaux moyens de prévention, Thèse de Doctorat, Univ. Paris VI, France, 53 p.
- Thomas M, p. Valette, a.l. Mausset et p. Dejardin (2000). High molecular weight kininogen adsorption on hemodialysis membranes: influence of pH and relationship with contact phase activation of blood plasma. Influence of pre-treatment with poly(ethyleneimine). Int. J. Artif. Organs., 23, 20-26.
- Violleau D., j.p. Croué, h. Essis-Tome, h. Habarou et m. Pontié (2005). Fouling studies of a polyamide nanofiltration membrane by selected natural organic matter: an analytical approach. Desalinatn, 173, 223-238.