Corps de l’article

1. Introduction

Cau River is a river in the North of Vietnam. The natural area of the river basin is 6 030 km2, representing 2% of the total country area (MONRE, 2006). In this river basin, population and industrial growths are considered as major concerns of local authorities due to their impacts on degradation of water quality. Therefore, water quality improvement for Cau River basin is one of the priorities of the Vietnamese government (PHAM, 2013).

Several socio-economic development scenarios for Cau River basin were created in 2010 (PHAM, 2013; PHAM et al., 2016), in which there were three scenarios of population (S1, S2, S3) and three industrial scenarios (S4, S5, S6). Population and industrial factors were considered as major causes for the degradation of water quality in the Cau River basin. These scenarios were built mainly based on local projections for population and industrial growths in two future years of 2015 and 2020, and then being assessed to know their impacts on future water quality of Cau River by using GIBSI computer tool. The scenarios and their impact on water quality are described in details in PHAM (2013) and PHAM et al. (2016).

In this research, the authors carried out a verification of the forecasted water quality results for Cau River. Monitoring water quality data of Cau River at Thac Rieng and Gia Bay stations were collected during five periods in 2015 and compared with the forecasted data. This verification is very important to understand the forecast quality and developed scenarios’ quality.

2. Study area

The study area in this research is the upstream of Cau River basin in Bac Kan and Thai Nguyen provinces (Figure 1). Bac Kan province includes eight administrative units, among which four units are related to the Cau River basin. Thai Nguyen province has nine units, whose all units are related to the Cau River basin. The Cau River, whose total length is 288 km, is located in the North-East of Vietnam. It is one of the largest rivers of the Thai Binh River system.

Figure 1

Map of Cau River basin in Vietnam and the study area which corresponds to the parts of the Cau River basin located in Bac Kan and Thai Nguyen provinces (PHAM et al., 2016).

Carte du bassin versant de la rivière Cau au Vietnam et de la zone d’étude qui correspond à la partie du bassin versant qui est située dans les provinces de Bac Kan et de Thai Nguyen (PHAM et al., 2016).

Map of Cau River basin in Vietnam and the study area which corresponds to the parts of the Cau River basin located in Bac Kan and Thai Nguyen provinces (PHAM et al., 2016).

-> Voir la liste des figures

This study focuses on verification of Cau River water quality in two river reaches at Thac Rieng and Gia Bay monitoring stations (Figure 2).

Figure 2

Location of the three selected river reaches and point pollution sources (PHAM et al., 2016).

Localisation des trois tronçons de rivière sélectionnés et des sources ponctuelles de pollution (PHAM et al., 2016).

Location of the three selected river reaches and point pollution sources (PHAM et al., 2016).

-> Voir la liste des figures

3. Methodology

3.1 Method of scenario development

Scenario development for integrated watershed management is based on probable changes in the future of socioeconomic and environmental factors such as population, industry, agriculture, land use conversion, domestic wastewater, and climate change. System analysis of local governments’ projections will help to define the probable changes in future. Due to the scarcity of available data for system analysis in several countries, especially in developing countries such as Vietnam, realistic assumptions are needed for scenario development. For example, assumption of capacity of domestic wastewater treatment plants, or increase of wastewater discharge of current industrial factories. Finally, scenarios are created by different combinations of the probable changes and assumptions for the above socioeconomic and environmental factors (Figure 3). For example, a scenario, which is created to assess the impact of domestic wastewater on water quality combines the factors of projections for population growth and projection and assumptions for domestic wastewater treatment plants’ capacities. The impacts of the developed scenarios on river water quality are assessed by using water quality simulation models.

Figure 3

Method of scenario development for integrated watershed management.

Méthode de développement des scénarios pour la gestion intégrée par bassin versant.

Method of scenario development for integrated watershed management.

-> Voir la liste des figures

3.2 Method of water quality forecast

There are several river basin integrated management simulation tools which can be used to assess the impacts of socioeconomic development scenarios on stream flow and river water quality such as SWAT (NEITSCH et al., 2009) and GIBSI (VILLENEUVE et al., 1998; ROUSSEAU et al., 2000). In this research, GIBSI was used to assess the impacts of developed socioeconomic scenarios on Cau River water quality. GIBSI is a computer tool which includes four main components (Figure 4) (QUILBÉ and ROUSSEAU, 2007):

  1. Database management system with a geographical information system (GIS), including spatial data such as gauge stations locations and attribute data such as database of soil types which are required for developing scenarios and running simulation.

  2. Scenario management component that helps developing various watershed management scenarios.

  3. Four simulation models:

    • HYDROTEL, a distributed physically-based hydrological model (FORTIN et al., 1995);

    • MODEROSS (DUCHEMIN, 2000) and ROTO (ARNOLD et al., 1998), used for soil erosion and sediment transport in rivers;

    • PoPES, a pollutant transport model (LASBLEIS et al., 2008);

    • QUAL2E, a river water quality model (BROWN and BARNWELL, 1987).

     

    • All these models in GIBSI should be calibrated for the studied watershed before assessing the impacts of developed scenarios on river water quality.

  4. Post-processing tools that are used to analyze and visualize simulation results.

Figure 4

Representation of the GIBSI components (adapted from QUILBÉ and ROUSSEAU, 2007).

Description de la structure de GIBSI et de ses composantes (adaptée de QUILBÉ et ROUSSEAU, 2007).

Representation of the GIBSI components (adapted from QUILBÉ and ROUSSEAU, 2007).

-> Voir la liste des figures

3.3 Method of verification

This method includes the following steps: 1) collecting monitoring data of water quality and current socioeconomic development in 2015; 2) data treatment:

  • Comparing the forecasted and current data of Cau River water quality in 2015 in two monitoring stations of Thac Rieng and Gia Bay;

  • Comparing and analyzing the current socio-economic development in 2015 and local governments’ former projections to find out the reasons of the differences between the forecasted and current water quality of Cau River.

4. Results and discussion

4.1 Results of water quality forecast

In this study, 14 scenarios were built in order to assess the impacts of seven factors: population, domestic wastewater, industry, livestock, agricultural fertilizer, land use conversion, climate change. After assessing the impacts of these scenarios on Cau River water quality by using GIBSI, it was found that two factors which have significant impacts on water quality of Cau River in the study area are population and industry (PHAM, 2013; PHAM et al., 2016). The six developed scenarios to assess the impacts of these two main factors are called scenarios from S1 to S6, in which S1, S2, and S3 are three scenarios for assessing the impacts of population and domestic wastewater, and S4, S5, and S6 are scenarios for industry.

Scenarios S1, S2, and S3 are the combination of the low, medium, and high future population growths and the low, medium, and high capacities of domestic wastewater treatment plant, respectively.

Scenarios S4, S5, and S6 are the combination of the local governments’ projection for the 14 new industrial zones and the different future industrial growths of current factories (keep current discharge, increase 5% in 2015 and 10% in 2020, increase 10% in 2015 and 20% in 2020, respectively). In these three scenarios, we assumed that all industrial factors meet the Vietnamese standard for industrial wastewater.

Results of Cau River water quality forecast for the six above scenarios in 2015 and 2020 is compared with the state in 2009 in figures 5 and 6. In these figures, concentrations of BOD5 are displayed by boxplot for each scenario in the future and for the reference situation. Each boxplot was represented with the 365 simulated values which correspond to 365 days in one year. The green lines in these figures indicate the BOD5 concentrations in the Vietnamese standard for surface water quality; the lower line is the standard value for the purpose of water supply with treatment (A2) (6 mg∙L-1 for BOD5) and the upper line is the standard value for the purpose of irrigation and other purposes (B1) (15 mg∙L-1 for BOD5).

Figure 5

Simulation results of BOD5 concentration in 2015 and 2020 at Thac Rieng for scenarios a) S1, S2, S3, and b) S4, S5, S6, compared with the reference year 2009 (PHAM, 2013).

Concentrations en DBO5 simulées en 2015 et 2020 à Thac Rieng pour les scénarios a) S1, S2, S3 et b) S4, S5, S6, comparées avec l’année de référence 2009 (PHAM, 2013).

Simulation results of BOD5 concentration in 2015 and 2020 at Thac Rieng for scenarios a) S1, S2, S3, and b) S4, S5, S6, compared with the reference year 2009 (PHAM, 2013).

-> Voir la liste des figures

Figure 6

Simulation results of BOD5 concentration in 2015 and 2020 at Gia Bay for scenarios a) S1, S2, S3, and b) S4, S5, S6, compared with the reference year 2009 (PHAM, 2013; PHAM et al., 2016).

Concentrations en DBO5 simulées en 2015 et 2020 à Gia Bay pour les scénarios a) S1, S2, S3 et b) S4, S5, S6, comparées avec l’année de référence 2009 (PHAM, 2013; PHAM et al., 2016).

Simulation results of BOD5 concentration in 2015 and 2020 at Gia Bay for scenarios a) S1, S2, S3, and b) S4, S5, S6, compared with the reference year 2009 (PHAM, 2013; PHAM et al., 2016).

-> Voir la liste des figures

The simulation results in two river reaches, namely at Thac Rieng and Gia Bay monitoring stations, in Cau River showed that:

  • At Thac Rieng: fast future population growth in Bac Kan has significant impacts on the increase of BOD5 concentrations in the future. The reason why population in Bac Kan is expected to grow fast is that Bac Kan Town was planned to become a city in 2015. Figure 5a shows that even if Bac Kan town installs a domestic wastewater treatment plant with a capacity of 10 000 people in 2015, as in the local government projection, the median value of BOD5 concentration is higher than the concentration in the reference state (Figure 5a, S1_2015). However, if the capacity of domestic wastewater treatment plant in Bac Kan Town is increased to 20 000 people (S2_2015) and 30 000 people (S3_2015), the water quality will be improved. Figure 5b shows that this river reach does not seem to be affected by industrial activities. The BOD5 concentrations in scenarios S4, S5, and S6 in future years are the same as in the reference state. This can be explained by the fact that in the upstream area of this river reach, there is no new future industrial zone, and the wastewater of all current factories is supposed to meet the standard for industrial wastewater.

  • At Gia Bay: The river reach at Gia Bay station is the outlet of the studied region of Cau River basin. From the upstream of Cau River to this outlet, there are two domestic wastewater treatment plants which will were planned to be installed in 2015, in Bac Kan Town and in Thai Nguyen City. Figure 6a shows that BOD5 concentrations in all three scenarios S1, S2 and S3 in both future years decrease compared with the reference state. In general, the water quality is improved if these two domestic wastewater treatment plants are installed and operated, even with the smallest capacities in scenario S1 (capacity of 10 000 people for treatment plant in Bac Kan Town and capacity of 100 000 people for treatment plant in Thai Nguyen City). For three scenarios S4, S5 and S6 (impacts of industry), figure 6b shows that BOD5 concentrations in both future years decrease compared with the reference state. This is due to the fact that in the future, all industries are supposed to meet the standards for industrial wastewater.

4.2 Results of water quality verification

The monitoring data for verification of Cau River water quality, collected from Center for Environmental Monitoring (CEM), Vietnam Environment Administration (VEA), are from five monitoring periods in 2015, which are:

  • Period 1: 5-13 May 2015;

  • Period 2: 15-22 July 2015;

  • Period 3: 10-16 September 2015;

  • Period 4: 9-15 October 2015;

  • Period 5: 2-9 December 2015.

These are the annual regular monitored values for Cau River. Only one sample was collected for each monitoring point along Cau River during each monitoring period. Therefore, there was only one value of BOD5 concentration for each of five monitoring periods at each river reach.

The monitored data of Cau River water quality at Thac Rieng and Gia Bay in these five periods of time and the median values of the forecasted data series in 2015 for scenarios S1 to S6 were used for comparison and verification. Results of Cau River water quality verification between monitoring data and the forecasted data of the six scenarios of population and industry, compared with the Vietnamese standards of surface water quality QCVN 08-MT:2015/BTNMT (A2 for the purpose of water supply with treatment and B1 for the irrigation purpose), are shown in figures 7 and 8.

Figure 7

Verification of BOD5 concentration in 2015 at Thac Rieng for scenarios a) S1, S2, S3, and b) S4, S5, S6.

Vérification des concentrations de DBO5 en 2015 à Thac Rieng pour les scénarios a) S1, S2, S3 et b) S4, S5, S6.

Verification of BOD5 concentration in 2015 at Thac Rieng for scenarios a) S1, S2, S3, and b) S4, S5, S6.

-> Voir la liste des figures

Figure 8

Verification of BOD5 concentration in 2015 at Gia Bay for scenarios a) S1, S2, S3, and b) S4, S5, S6.

Vérification des concentrations de DBO5 en 2015 à Gia Bay pour les scénarios a) S1, S2, S3 et b) S4, S5, S6.

Verification of BOD5 concentration in 2015 at Gia Bay for scenarios a) S1, S2, S3, and b) S4, S5, S6.

-> Voir la liste des figures

The verification results in above figures show that, in general, BOD5 monitoring concentrations are lower than the forecasted results in all of five periods of time in 2015. The BOD5 monitoring concentrations in all of five periods in 2015 meet the standard QCVN 08-MT:2015/BTNMT of both purposes A2 and B1, while the forecasted median values in some cases are over the standard for the purpose of water supply with treatment (A2), especially at Thac Rieng (Figures 7a and 7b). The differences between the forecasted median values in S4, S5 and S6 were not significant, which were 7.56 mg∙L-1 in S4, 7.56 mg∙L-1 in S5, 7.57 mg∙L-1 in S6 at Thac Rieng, and 6.16 mg∙L-1 in S4, 6.18 mg∙L-1 in S5, 6.20 mg∙L-1 in S6 at Gia Bay, therefore there was an overlap of three lines for S4, S5 and S6 in figures 7b and 8b.These verification results show that the monitoring results in reality of Cau River water quality (BOD5 concentrations) show a better water quality than the forecasted results.

4.3 Discussion

The verification results show that the local governments in Bac Kan and Thai Nguyen provinces well controlled the Cau River biochemical water quality in 2015. In order to know the reasons of this good control of water quality, we implemented a review of the projected growths in the six scenarios and made a comparison with the population and industrial growths in reality in these two provinces. This review showed several differences which may be the reasons of good control of Cau River water quality in 2015. These differences are discussed below.

4.3.1 Population and domestic wastewater treatment plants

In the three developed scenarios for population, the population in Bac Kan Town was forecasted to grow fast with three level of growth: low in scenario S1, medium in S2, and high in S3 because the local government wished Bac Kan Town to become a city in 2015. This wish came true, Bac Kan Town became Bac Kan City in March, 2015. However, the actual population data of Bac Kan City in 2015 (BAC KAN STATISTICS OFFICE, 2016) was lower than the forecasted population in all three scenarios for population: 26.2% lower than forecasted in scenario S1, 28.0% in S2, and 29.8% in S3. This may be one of the reasons for Cau River water quality to be better than forecasted, due to less pressure from the impact of fast population growth in Bac Kan Town.

On the contrary, the population data of Thai Nguyen City in 2015 (THAI NGUYEN STATISTICS OFFICE, 2016) was higher than forecasted. However, the difference between real and forecasted population data in 2015 in Thai Nguyen City is not important, only 11.4% in the low population growth scenario S1, 7.3% in the medium population growth scenario S2, and 5.1% in the high population growth scenario S3, as compared with the forecasted population. The differences between the real and forecasted population in Bac Kan and Thai Nguyen cities are indicated in figure 9.

Figure 9

Verification of population in 2015 in Bac Kan and Thai Nguyen cities.

Vérification de la population en 2015 dans les villes de Bac Kan et Thai Nguyen.

Verification of population in 2015 in Bac Kan and Thai Nguyen cities.

-> Voir la liste des figures

Regarding the domestic wastewater treatment plants, it was projected by the local governments, in the three population scenarios S1, S2, and S3, that there would be two domestic wastewater treatment plants in Bac Kan Town and Thai Nguyen City in 2015. These projections went into practice, since these two domestic wastewater treatment plants are now in operation with capacities as local projections: 3 000 m3∙d-1 (or for around 10 000 connected people) in Bac Kan City and 21 000 m3∙d-1 (or for 100 000 connected people) in Thai Nguyen City. Besides, domestic wastewater treatment plant in Cho Moi Town, which belongs to Cho Moi district, Bac Kan province, was constructed and is in operation with a capacity of 800 m3∙d-1. This treatment plant in Cho Moi Town was not considered in developing and assessing the impacts of population scenarios S1, S2, S3. This is also considered as one of the reasons why the Cau River monitored water quality (BOD5 concentration) is better than forecasted.

4.3.2 Industry

To develop industrial scenarios S4, S5, and S6, it was assumed that wastewater from all industrial factories meets the Vietnamese standards for industrial wastewater, because all industries must meet these standards according to Vietnamese environmental protection law. The monitoring results show that the Cau River water quality (BOD5 concentration) in 2015 was good, and below the Vietnamese standard for surface water quality, even for the purpose of water supply with treatment (A2). This indicates that the industrial development in Bac Kan and Thai Nguyen in recent years did not increased much, and/or that the local governments have controlled well the quality of industrial wastewater from factories in the study area.

5. Conclusion

The verification result showed that, in general, the quality of socio-economic scenario development based on local projections and forecasted water quality results, which were simulated by GIBSI for Cau River, is relatively accurate. The fact that the monitored water quality is better than the forecasted water quality may be due to the population being lower than forecasted in Bac Kan City. Besides, another reason which may lead to a water quality better than forecasted in Cau River is the operation of a domestic wastewater treatment plant in Cho Moi Town, which was not taken into consideration in the developed scenarios. This verification result can provide guidance for increasing quality of scenario development, useful for water quality forecast.